Plasterboard Stud And Metal Stud Frame

Wednesday, March 4th, 2009 at 2:05 pm

A Simple Solution To Drywall Corner Cracks Starting with the right materials on a construction project can really pay off.

Drywall corner cracks, for example, are unsightly, can be costly to fix and often come when you least expect them. They are a nuisance for both homeowners and construction professionals. Fortunately, it’s often possible to avoid cracks by making one small, simple change during the construction process. It’s easy to understand why corner cracks appear. Traditional "bare metal" corner bead-the thin metal strip that goes over the corner of a wall before it is finished and painted-is attached to the drywall corner using nails or screws to hold it in place. These fasteners penetrate both the drywall and the framing. If the wood frame warps, shrinks or swells, the fasteners pull and stress the metal bead along with it, producing cracks. Structural movement due to foundation settling can also add stress to the corner bead.

While the process of fixing corner cracks can vary depending on the severity, crews often have to remove the metal bead, install a new piece and then renail it.

Multiple coats of joint compound are also applied throughout the process, sometimes requiring several trips to the residence. Corners then need to be repainted. In cases where walls are ornately painted or textured, the finishing alone could push the cost into the hundreds, not to mention the inconvenience and time it takes to coordinate all the repairs. The good news is that corner cracks can be quite preventable. For example, homeowners can simply request that their builder or contractor substitute a high-performance product such as Sheetrock brand paper-faced metal bead by USG for the standard, bare metal corner bead typically used. stud & track Made with a strong paper tape laminated to a sturdy, rust-resistant metal form, Sheetrock paper-faced metal bead is adhesively applied to the drywall corner and, as a result, resists edge cracking, paint chipping and everyday wear and tear. This is a classic example of how requesting one small, simple change during the construction process can really pay off.

Builders and contractors can appreciate how it installs faster and requires less joint compound to finish. Homeowners can appreciate that it comes with a limited 30-year no-edge-crack warranty. By: Wendy Mitchell Article Directory: http://www.articledashboard.com For additional information on this innovative solution, please call (800) USG-4YOU (800.874.4968) or visit usg.com/pfbead. Using the right product during construction can reduce the chance that drywall corner cracks will appear later on. That means saving time and money. Drywall plus Thickness of Tile – Fix-it Forum: Home Improvement … You mount the box to accomodate the drywall plus the thickness of the tile. Toolmonger Blog Archive The Pocket Kicker II The Pocket Kicker II will lift up to twelve-foot sheets of drywall with ease. Measuring just 6-1/2 long, it ll fit in almost any toolbox, tool pouch, or even your back pocket. Advocate: Drywall woes may affect several hundred thousand homes … MANATEE The leader of a national consumer advocacy protection group believes the problem of tainted drywall could plague a couple hundred thousand homes nationwide. By the Numbers: Chinese-drywall problems spread beyond Florida … Chinese Drywall Problems South Florida Pounds of of drywall made in China that have been offloaded at U.S. ports since 2006, enough to build 60000 homes, according to a HeraldTribune.com.